Apeks WTX System
This simple, yet strong, harness can take the load of a fully rigged technical diver. It can be easily customised with the hardware of your choice.
Apeks
Apeks
Apeks
WTX Deluxe One-Piece Web Harness
​
​
The WTX and WTX-D Series is a selection of harnesses, buoyancy cells and accessories which offer unparalleled versatility due to the modular nature of the whole system. Each component can be configured into a highly technical rig for those trained to push the limits, or scaled down to make a travel friendly set up suitable for any diver.
This simple, yet strong, harness can take the load of a fully rigged technical diver and can be easily customised with the hardware of your choice.
Please note that the back plate is not included and must be purchased separately. Your back plate options for this harness are the WTX Aluminium Back Plate, the WTX Stainless Steel Back Plate and the Ultralight Travel Plate. Tank bands are also not included.
​
-
Can mount directly to a single cylinder using dual nylon cylinder bands or a single tank adaptor
-
Can accept an Apeks back plate for heavy loads such as twin steel cylinders
-
Multiple grommet settings on the waistband allow the attachment of the SureLock™ weight
-
system
-
Open shoulder design allows diver to add or remove hardware for total customisation
-
Made from rugged 1050D Ballistic Nylon
-
Removable crotch strap made of 2” (5cm) soft webbing
-
6-two inch stainless steel D-rings (2, angled, on shoulders, 2 on the hips and 2 on the crotch
-
strap)
-
6-one inch stainless steel D-rings along the sides accommodate light canisters, argon bottles or
-
other accessories
-
2-one inch stainless steel D-rings along the lower back are for marker buoys, reels or other
-
accessories
-
Removable backpad
-
Heavy-duty waist buckle made of stainless steel
-
Stainless steel triloaders distribute the load between the back, waist and shoulders for a great fit
-
SOLAS reflector airway hold-downs can be removed or repositioned
​
​
WTX-D18, D30, D40 Single Cylinder Wing
​
The WTX and WTX-D Series is a selection of harnesses, buoyancy cells and accessories which offer unparalleled versatility due to the modular nature of the whole system. Each component can be configured into a highly technical rig for those trained to push the limits, or scaled down to make a travel friendly set up suitable for any diver.
Single cylinder wings, often referred to as donuts, are oval shaped air cells or bladders that are not permanently attached to a harness. While single cylinder wings have their origins in the realm of technical diving, they are becoming very popular in the recreational community. Not only are these single cylinder wings streamlined, but due to their shape being a continuous loop, they are very stable underwater. There is no dramatic shift of air from left to right.
Apeks single cylinder wings are a smart design that allows a cylinder to nest deep inside them. These wings mate up nicely to the rest of the Apeks WTX collection of high quality harnesses, plates and accessories. They can be configured in multiple ways to match the type of diving that you do. As with the rest of the WTX collection, these single cylinder wings are built from the finest quality materials. They are designed by Apeks and built in our own factory.
​
​
WTX-D45 Twin Cylinder Wing
​
​
The WTX and WTX-D Series is a selection of harnesses, buoyancy cells and accessories which offer unparalleled versatility due to the modular nature of the whole system. Each component can be configured into a highly technical rig for those trained to push the limits, or scaled down to make a travel friendly set up suitable for any diver.
The WTX-D twin cylinder wings are designed for twin set diving and perfectly complement the Apeks range of twin manifolds and the Tek3 regulators. Often referred to as donuts, the WTX-D wings are oval shaped air cells or bladders that are not permanently attached to a harness. Not only are these donut wings streamlined, but due to their shape being a continuous loop, they are very stable underwater. There is no dramatic shift of air from left to right.
The Apeks twin cylinder wings are a smart design that allows a cylinder to nest deep inside them. These wings mate up nicely to the rest of the Apeks WTX collection of high quality harnesses, plates and accessories. They can be configured in multiple ways to match the type of diving that you do. As with the rest of the WTX collection, the wings are built from the finest quality materials. They are designed by Apeks and built in our own factory.
​
SureLock Weight System - 10lb
​
The WTX and WTX-D Series is a selection of harnesses, buoyancy cells and accessories which offer unparalleled versatility due to the modular nature of the whole system. Each component can be configured into a highly technical rig for those trained to push the limits, or scaled down to make a travel friendly set up suitable for any diver.
This popular accessory is ideal when it becomes necessary to add additional weight to your rig. Using the included hardware, they may be bolted to the WTX harness or to the SureLock™ Attachments. SureLock™ is the best mechanical weight release system in the industry today. A simple click is all that is needed to engage the weights and a simple pull on the handle to release them.